How To Add An LCD To Display Weight In Your Arduino Project ?

Hello and we'll come to this and the last one and which we will talk about how to add and see the display or displaying Guei NCD. But this called First go to find examples liquid crystal then hello all or to simply go with Halward. OK. Now this is the code for the LCD display.

This is the circuit you need to connect us to number 12 enable forbidden number 11 default to the 7 2 5 4 3 2 1 and the R.W. to get our own Vcc to go down. We have to go down Vcc to 5 volts. And as you can see all of these lines are separating the connection. Now next you can go and it includes this library and define this Konstanz I want to do this I will just copy this and paste them my code and just keep writing. So now what we'll do next is simply copy the rest of the lines as you can see here.

Also Read: Everything You Need To Know About Arduino

Set the LCD bar let's go here. And there's this set up area. Now if you click varify you'll see that there is no problem at all. Then go to that will set the cursor article on 0 line 1. This sometimes will exceed the cursor and this sentence will help Brant. So let's go with these lines and go to the loop at the end of these lines if serial is available we will add these two lines. We want that way to be displayed on LCD. So just keep going. It's k variable which display units in kilograms and go sibly this here click verify.

As you can see done combining So now the LCD will display the unit or the weight that you placed on the road still on the LCD display on blace line 1. And the second begins with zero. So Line 1 is the second draw. So this unit will be just a bit on the second row and the counting will start with zero. So this is it.

Also Read: Everything You Need To Know About Arduino

This is how to display weight on Al-Sa'adi And how does the Sublette on Syria on the monitor here and this is our fully functional program. Now if you want to according accepter or a bottle that share the gist of Magellan with you can simply place everything inside this loop in an IF statement.

If let's say Bush put on equals 1 then execute all of these lines of codes. But that's it for now. If you want to bring anything else you can simply change the course or position and print it. I will show you this project in action. And the last part which is the practical bot if you have any questions please ask in the queue on a board. Thanks for learning the scores. And please don't forget to review it. This is educational engineering team.